Microlon Gas Engine Kits for Automotive Engines!

Microlon Std-Eng-Kit

Solution Graphics
Microlon Treatment Kits for gasoline applications have been created to give amazing results for all gasoline engine sizes.

Each Kit contains Microlon’s Fuel System Treatment which contains the highest quality cleaning agents, corrosion inhibitors, antioxidants.

These ingredients combine to prepare the pore structure to receive the Microlon Dry Film Lubricant that provides lasting protection in the fuel system (especially fuel injectors), valves and upper cylinder assemblies.

The Engine Treatment thoroughly cleans the lower portion of the engine and significantly reduces the harmful effects of friction by coating internal engine parts with a durable micro-thin dry film lubricant coating. Unlike our competitors, Microlon treats engine metal, not the oil!

Treatment Benefits!
These Treatment Kits save you money by reducing fuel consumption, decreasing maintenance costs and extending the life of your engine. You will also notice smoother operation and improved performance with increased horsepower and torque. Noxious emissions from a treated engine will be reduced significantly! All Microlon products are GUARANTEED to last the life of your engine.

MIL is Microlon's standard formulation and is added to the crankcase for the treatment of internal combustion engines and other industrial applications. This formulation is fine for most passenger cars and light trucks

CL-100 is Microlon’s high performance formulation and is added to the crankcase. Designed for use in all high performance engines, and for engines operating under extreme conditions. CL-100 was originally developed for use in aircraft engines.

CL-100 can be substituted for MIL in any application where an upgrade is desired, to a more powerful metal treatment option!

Fuel System Treatment is added to the fuel tank and contains the highest quality cleaning agents, corrosion inhibitors and antioxidants. These ingredients act the same as CL-100 to prepare the pore structure to receive the Microlon Treatment and provide lasting protection.

C-90 is also added to the crankcase along with the MIL or CL-100 to supercharge the treatment process even more!

These Kits are for gasoline engines only. Other automotive products, such as power steering, transmission, differential and transfer case treatments, as well as greases, can be found by clicking on Microlon Individual Products.


Successful treatment depends upon proper installation procedure as follows:

The Engine Only treatment instructions are covered step-by-step on this page. It is recommended that you carefully read all instructions prior to installation.

1. Oil and Filter Changes. It is always best to change the oil (non-synthetic works best for treatment period), oil filter and (fuel filter in older cars) before installing the Microlon Engine Treatment kit. However if you have recently (less than 1000 miles ago) changed your oil you can skip this step. Please note if you use an oil filter that filters 10 micron or less you should use a standard filter for this treatment process. It is also important to drain out or omit 8.4 oz of oil when completing oil change. After treating your engine with Microlon, do not change the oil for at least 1,000 miles. Thereafter, changing oil in accordance with your vehicle’s recommended schedule is best.

2. Shake Well. Shake Well. Shake Well. Shake Microlon products thoroughly before adding to engine (at least 1-2 minutes). The Microlon resin is held in suspension only after being shaken up from the bottom of the can.

3. Add Microlon to the Crankcase. Start the engine and let it run until it reaches normal operating temperature. Microlon Engine Treatment treats the bottom of your engine through the oil and works best when added to a running engine. We recommend using a funnel and adding Microlon fluid through the oil dipstick. This takes the product directly to the bottom of the pan where it is distributed through the engine the fastest. First, start with the Compound 90 product remembering to have taken out 8.4 oz of oil. Shake well and add. Secondly, add the Engine Treatment, shake well and pour it right on top of the C-90 it will allow the process to move faster. This product mixes through the oil and thins it; you do not remove any oil for the Engine Treatment. If it is not practical for you to treat the engine in this manner, after warming the engine turn it off and install the Microlon products through the oil port, usually located at or near the top of the engine.

4. Add 8.4 oz Microlon Fuel Treatment. Microlon Fuel System Treatment cleans and conditions the top of your engine through the fuel system. Make sure to shake the Fuel System Treatment well before adding to a ¼ tank of fuel or less. We want the cleaning agent and resin to travel through the fuel system as quickly as possible to ensure a complete treatment and avoid the settling of the resin. Fill tank when low, treatment of the top half of the engine is complete.

5. Operate the Vehicle. Immediately after adding the Engine and Fuel System Treatments to your engine, it is essential that you operate your vehicle under normal driving conditions for approximately 100 miles (167 km). This will give the cleaning agents and solvents sufficient time to clean your engine and dissipate, while allowing the resin to travel through the engine to where it is needed. If you do not have the time to drive, do not treat. Driving immediately after treatment is essential and cannot be avoided.


...SHIPPING RATES...

PLEASE NOTE… We ship Microlon Products only! to addresses within the United States of America!

The Following Shipping Rates apply to the Lower 48 United States ONLY!
Orders Totaling $49 and more - FREE SHIPPING!
Orders Totaling $25 to $48.99 - $6.50 Flat Rate
Orders Totaling $24.99 or Less - $4.50 Flat Rate
*Nevada Residents are charged 7.100% State Sales Tax
**Alaska & Hawaii Residents, Please Email microlon1@gmail.com For Shipping Costs!


Compact/Small Car Engine only Treatments

Microlon Std 4 cyl Treatment

Standard Engine Treatment Kit for Pre-1990, 4-cylinder engines

Kit Includes 16 oz of Engine Treatment, 8 oz C-90 & 8 oz of Fuel System Treatment

Standard Compact Car Kit - $103.95 Your Price! $93.56 + FREE SHIPPING!



Microlon Hi-Performance 4 cyl Treatment Hi Performance Engine Treatment Kit for Pre-1990, 4-cylinder engines

Kit Includes 16 oz of Engine Treatment, 8 oz C-90 & 8 oz of Fuel System Treatment

High Performance Compact Car Kit - $155.95 Your Price! $140.36 + FREE SHIPPING!




Car & Light Truck Engine Treatment Kits

Std Eng Kit 90 and later to 360cu in

Standard Engine Treatment Kit for 1990 and later 4 cylinder engines, All 6-cylinder engines and 8-cylinder engines under 360 cubic inches (5.9 liters)

Kit includes 32 oz of Engine Treatment, 8 oz C90 & 8 oz of Fuel System Treatment

Standard Car & Light Truck Kit - $139.95 Your Price! $125.96 + FREE SHIPPING!



HP Eng Kit for 90 and later Hi Performance Engine Treatment Kit for 1990 and later 4 cylinder engines, All 6-cylinder engines and 8-cylinder engines under 360 cubic inches (5.9 liters)

Kit includes 32 oz of Engine Treatment, 8 oz C-90 & 8 oz of Fuel System Treatment

Hi Performance Car & Light Truck Kit - $229.95 Your Price! $206.96 + FREE SHIPPING!




Big Block V8 Car & Truck Engine Treatment Kits


Std Eng Kit over 360 CU In

Standard Engine Treatment Kit for 360 cubic inches (5.9 liters) displacement and up.

Kit contains 40 oz of Engine Treatment, 8 oz C-90 and 8 oz of Fuel System Treatment

Standard Big Block Engine Kit - $159.95 Your Price! $143.96 + FREE SHIPPING!



HP Eng Kit

Hi Performance Engine Treatment Kit for 360 cubic inches (5.9 liters) displacement and up.

Kit contains 40 oz of Engine Treatment, 8 oz C-90 and 8 oz of Fuel System Treatment

Hi Performance Big Block Engine Kit - $271.95 Your Price! $244.76 + FREE SHIPPING!




Racing Formula

Racing Formula

Microlon Racing Formula is a special Microlon formulation optimized for high performance racing vehicles that operate at higher compressions, operating temperatures and RPMs.

Developed primarily for professionally built race engines.

Kit contains 16 oz of Engine Treatment - $219.95 Your Price! $197.96 + FREE SHIPPING!








Microlon Information
FAQ
Test Data
Testimonials
Products Page
Aircraft Engine Kits
Marine Engine Kits
Gas Engine Kits
Diesel Engine Kits
Motorcycle Engine Kits
Individual Products
Gun Juice
Back to Top of Page